SCRAPER FOR JOINTS

The RUBISCRAPER-250 is the fastest and safest option to eliminate cement grout from joints, because unlike others, its tungsten carbide accessories do not work by abrasion but literally dig and remove the grout.
With ergonomic design and between working speeds, the RUBISCRAPER-250 allows you to carry out from small renovations to the complete renovation of all the joints of a specific surface.
The interchangeable accessories of the RUBISCRAPER-250 are resharpenable and available in various sizes in order to adapt to the different widths of the joints.
The second option is the traditional RUBI joint scraper, with ergonomic handle and two small plates in electrodeposited tungsten carbide with great abrasion resistance.
These plates can be coupled up to 3 pieces depending on the width of the joint to be eliminated.
Each plate in tungsten carbide has a thickness of 2 mm, therefore the minimum joint that can be eliminated with this scraper is 2 mm., While the maximum eliminable joint width is 6 mm.
The RUBI joint scraper is very practical for renovations when you need to replace some tiles. Eliminating the grout before replacing the broken tile reduces the risk of damaging intact tiles and in this way we will create space to place the tile which could have small differences in size because it probably belongs to a different production batch or to a different manufacturer.